Longruner Watch Repair Kit Watchmaker’s Tools Battery Replacement Watch Case Back Opener Link Band Remover Tool Kit
Longruner upgraded watch repair kit is a professional kit for both experiences watchmaker and those who new on watch repair. It is a full set repair kit to meet your professional and general watch repairing needs.
What’s difference between Longruner watch repair kit
►Watch case opener with maximum extensible range 55mm
It is a bigger one with wider opening range of 20~55mm. Some same small case opener will just have opening range from 20mm to 37mm, which is not capable for men’s watches.
►Watch capping machine(press tool)
The watch capping machine comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm.
How to use watch capping machine(For those snap watch case back)
1. First select a die that is larger than the watch, and install it on the lower screw of the pliers;
2. Select a die that is slightly smaller than the back cover of the watch, and attach the upper end of the pliers;
3. Place the watch face down on the press on the lower mouth and position the back cover in the proper position;
4. Gently press down on the pliers to close the back cover;
5. When the watch is pressed, put the table cloth on the pad to protect your watch!
1. This watch press tool is very useful for closing snap on back watches and installing flat mineral glass crystals.
2. The watch press is used to close snap on watch backs, install bezel rings, and make battery changes.
3. This exclusive straight wall nylon dies will not scratch or mar crystals.
4. The press is made of a cast iron metal frame and can be mounted to a bench for stability.
55MM Watch Case Opener
1. Open and close swivel rear cover watch.
2. The tool will open most of the watch backs, Open waterproof watch case back from 20~55mm.
3. 1 X Watch Case Opener（55mm）+18 X Adjustable Case Opener Pins.
Help to adjust watch bands.
Spring bar tool(v head,flat head)
Remove the spring bar of watch band, assemble/disassemble the watch strap/buckle, measure the diameter of the case back.
Yellow watch back pry knife opener
Open snap case back.
Band holder + hammer + Pin punches
Remove/adjust watch band, buckle.
You can use the tweezers to pick up small parts of a watch or watch repair tool accessories , such as screws, hands, battery, etc.
Watch case holder + adjustable case back opener
Open waterproof watch case back from 20~55mm.
1. Professional pin remover tool.Can be used to remove pin easily.
2. When doing it you'd better put 2 pieces of smooth paper on watch dial so that it will not be scratched.
1. Standard flat head screwdriver, simple and practical. Color-coded hats quickly distinguish sizes.
2. Perfect for watch repair, watch battery replacement, remove watch bracelet screw links, eye glasses repair and jewelry.